Sample Programs - Mitsubishi MELSEC-Q Series User Manual

10
FUNCTIONS AND PROGRAMMING

10.5 Sample Programs

When SW PVC-CCPU is installed into the development environment (personal
computer), sample programs are registered to <User-specified folder> - <CCPU> -
<CCPUTooL> - <Sample>.
The sample programs are provided for user program creation as reference.
Please use the sample programs at your own discretion.
Folder name
GOTtest
*1
DevAccess
MDtest
Others
*1
CFChange
EntryWDTInt
QBFtest
MotionLink
QBFMessage
ROMShutdown
LoginUserRegist
ParamBackUp
Script
ParamRestore
ROMFormat
Table10.40 Registered sample programs
File name
GOTtest.c Sample program for connection to the GOT
Sample program for the following access using the MELSEC data link functions.
• Access to a CC-Link IE controller network module (own station) controlled by
DevAccessChanC the C Controller module
CIEC.c • Access to CC-Link IE controller network modules and programmable controller
CPUs on other stations via a CC-Link IE controller network module controlled
by the C Controller module
Sample program for the following access using the MELSEC data link functions.
• Access to a CC-Link module (own station) controlled by the C Controller
DevAccessChanC
module
CL.c
• Access to CC-Link modules and programmable controller CPUs on other
stations via a CC-Link module controlled by the C Controller module
Sample program for the following access using the MELSEC data link functions.
• Access to a MELSECNET/H module (own station) controlled by the C
DevAccessChanM Controller module
NH.c • Access to MELSECNET/H modules and programmable controller CPUs on
other stations via a MELSECNET/H module controlled by the C Controller
module
Sample program for the following access using the MELSEC data link functions.
DevAccessChanQ
• Access to CPU No.1 mounted together with the C Controller in a multiple CPU
BF.c
system
FTPGet.c Sample program for FTP communication
MakeRAMDisk.c Sample program for creating RAM disk
CFChange.c Sample program used to unmount a CompactFlash card when X0 turns ON
EntryWDTInt.c Sample program for user watchdog timer error interrupt registration
MotionLink.c Sample program for utilization of linkage with the Motion CPU
QBFMessage.c Sample program for message transmission via MELSECNET/H
ROMShutdown.c Sample program used to shut down the standard ROM when X0 turns ON
STARTUP.CMD Sample script file for login user registration
STARTUP.CMD Sample script file for parameter backup
STARTUP.CMD Sample script file for parameter restoration
STARTUP.CMD Sample script file for standard ROM formatting
* 1 For the Q06CCPU-V-B, the following sample programs cannot be used.
• Sample programs using MELSEC data link functions
• Sample programs using a CompactFlash card
Sample program details
10.5 Sample Programs
9
10
11
12
13
14
15
16
10
- 74