Mitsubishi MELSEC-Q Series User Manual page 324

9
UTILITY OPERATION
(3) System information screen
Item
CPU status
CPU module
Status
Switch
Error code
Present error
Date
Time
9
- 33 9.2 C Controller Setting Utility
9.2.5 Operating Module monitoring screen
Displays the information of the C Controller system.
Figure 9.31 System information screen
Table9.15 Explanation of System information screen
Displays the status of the CPU module(s) that comprises the C Controller
system.
Double-clicking a C Controller module or programmale controller CPU in
error status will open the "Error details" screen. (
Displays CPU No. of the CPU module.
"Empty" is displayed when no CPU module is installed.
(Display range: "No. 1" to "No. 4", "Empty")
Displays the operation status of the CPU module.
(Display range: "RUN", "STOP", "PAUSE", "RESET")
Displays the switch status of the CPU module.
(Display range: "RUN", "STOP", "RESET")
Displays an error code of the first stop/continue error that occurred in the
CPU module.
The other errors can be confirmed on the "Module information" screen
( Section 9.2.2) or "Event history" screen (
Displays an message corresponding to the "Error code".
Displays the date when the error occurred.
Displays the time when the error occurred.
Description
this section (3)(a))
Section 9.2.3).
System
configuration
Reference
section
(To next page)