Setting Monitoring Target - Mitsubishi MELSEC-Q Series User Manual

9
UTILITY OPERATION

9.6.4 Setting monitoring target

Set the network for which the Device monitoring utility is used.
Make the settings at startup of the Device monitoring utility.
POINT
(1) Menu item to be selected
Select [Setting]
(2) Dialog box
Channel
Network settings
When the own station is selected in the Network Settings, network No."0" and
station No."255" are displayed in the network status area.
[Network settings] from the menu bar.
Figure 9.138 Network settings dialog box
Table9.123 Explanation of Network settings dialog box
Item
Set a channel to be used. (
Select the own or other station and set the network number and
station number. (
Description
Section 10.1, 10.3.9)
Section 10.1, 10.3.10)
9.6 Device Monitoring Utility
9.6.4 Setting monitoring target
9
10
11
12
13
14
15
16
9
- 184