Operating I/O Assignment Settings Screen - Mitsubishi MELSEC-Q Series User Manual

9
UTILITY OPERATION

9.2.8 Operating I/O assignment settings screen

Set Parameter settings (I/O assignment settings) of the C Controller module.
Perform the I/O assignment for the slots and set the parameters related to the base unit
where modules are installed.
POINT
1. In a multiple CPU system configuration, utilize the multiple CPU parameters
set to the programmable controller CPU(s) or C Controller module(s).
Utilizing the existing multiple CPU parameters prevents setting mismatches
between the C Controller module and other CPUs.
2. When the multiple CPU parameters are not utilized in a multiple CPU system
configuration, complete the <<Multiple CPU settings>> tab setting and then
make the I/O assignment settings.
3. To update the settings into the C Controller module, write the parameters from
the <<Online operation>> tab and turn off and then on or reset the C
Controller system.
9.2.8 Operating I/O assignment settings screen
9.2 C Controller Setting Utility
9
10
11
12
13
14
15
16
9
- 48