Mitsubishi MELSEC-Q Series User Manual page 83

4
FUNCTIONS
Function
Motion CPU
control
Multiple CPU
instruction
system
Motion CPU
device access
Connection between C
Controller module and GOT
(microcomputer connection)
Unmounting CompactFlash card
Login user access restriction
C Controller
setting utility
Module
CC-Link utility
setting
monitoring
MELSECNET/H
from
utility
development
environment
CC IE Control
utility
Device
monitoring utility
Telnet function
Table4.1 C Controller module function list (Continued)
Description
Starts the SFC program or servo program of the
Motion CPU or changes the set value/present value
of the servo from the user program of the C
Controller module.
Reads/writes data from/to the Motion CPU devices
from the user program of the C Controller module.
Accesses the GOT using the RS-232 interface of
the C Controller module.
Unmounts the CompactFlash card by operating the
RESET/SELECT switch of the C Controller module
main body.
Restricts the parameter write operation/Telnet
function from FTP/each utility by setting (adding/
deleting) the login user to the C Controller module.
Allows confirmation of the C Controller module
status (switches, error LED, event history, etc.).
Also, makes the parameter setting, communication
diagnostics, etc. of the C Controller module.
The Q06CCPU-V-B has the following restrictions.
• Timeout time of the communication performed by
the MELSEC data link functions cannot be set.
• Communication diagnostics is not available.
Makes the parameter setting, network monitoring,
etc. of the CC-Link module controlled by the C
Controller module.
Makes the parameter setting, network monitoring,
etc. of the MELSECNET/H module controlled by the
C Controller module.
Makes the parameter setting, network monitoring,
etc. of the CC-Link IE controller network module
controlled by the C Controller module.
Monitors the device data of the programmable
controller CPU, etc.
Allows the simple remote debugging (task
information display, memory dump, etc.) of the C
Controller module from the Telnet tool of the
development environment (personal computer)
without using Tornado.
Q06CCP
U-V
:Applicable, :Applicable but partially restricted,
4.1 Function List
Applicability
Reference
Q06CCP
section
U-V-B
14.7
14.8
4.16
5.4,
5.8.3
5.11
9.2
9.3
9.4
9.5
9.6
4.17
:N/A
4
1
2
3
4
5
6
7
8
- 3