Mitsubishi MELSEC-Q Series User Manual page 458

9
UTILITY OPERATION
9
- 167 9.5 CC IE Control utility
9.5.5 Operating Parameter settings screen
(a) Initial values of "Device name", "Points", "Start", and "End"
The following indicates the initial values of "Device name", "Points", "Start", and
"End".
Table9.108 Initial values of "Device name", "Points", "Start", and "End"
Setting item Device name
Trans.1
Trans.2
Trans.3 to
Trans.64
(b) "Device names" on "Link side" and "CPU side"
The following indicates the setting ranges of the "Device names" on the "Link
side" and the display of the "Device names" on the "CPU side".
Table9.109 "Device names" on "Link side" and "CPU side"
"Link side" setting range
LX
LY
LB
LW
(c) Setting ranges of link side "Points", "Start", and "End"
The following indicates the setting ranges of the link side "Points", "Start", and
"End".
(The same setting ranges are applied to all of "Trans.1" to "Trans.64".)
Table9.110 Setting ranges of link side "Points", "Start", and "End"
Device name
LX
LY
LB
LW
* 1 Only a multiple of 16 can be set to "Points" and "Start" of LX, LY and LB.
* 2 Only a (multiple of 16 -1) can be set to "End" of LX, LY and LB.
Points
LB 32768
LW 131072
"(Blank)"
Points/Start/End
Points
Start
End
Points
Start
End
Points
Start
End
Points
Start
End
Start End
0000 7FFF
0000 1FFFF
"CPU side" display
LX buffer
LY buffer
LB buffer
LW buffer
Setting range
*1
16 to 8192
*1
0000 to 1FF0
*2
000F to 1FFF
*1
16 to 8192
*1
0000 to 1FF0
*2
000F to 1FFF
*1
16 to 32768
*1
0000 to 7FF0
*2
000F to 7FFF
1 to 131072
0000 to 1FFFF
0000 to 1FFFF