Mitsubishi MELSEC-Q Series User Manual page 216

5
SETTINGS AND PROCEDURES BEFORE OPERATION
(5) Changing the IP address of the C Controller module
5
- 30 5.6 Network Settings for 1:1 Connection
Perform the following to change the IP address of the C Controller module from the
default IP (192.168.3.3).
(a) Displaying the relevant screen
From the <<Online operation>> tab of the C Controller setting utility, click the
button and select the <<IP address>> tab.
Detail
(b) Setting the IP address
Change the IP address (and Subnet mask, Default gateway if necessary), and
click the [Set] button.
After setting, reset the C Controller module to update the IP address settings.
Figure 5.32 <<Online operation>> tab
Figure 5.33 IP address settings