Mitsubishi MELSEC-Q Series User Manual page 156

4
FUNCTIONS
1) Set "PAUSE" and select
a C Controller module
or programmable
controller CPU.
Figure 4.64 Remote PAUSE from development environment (personal computer)
(4) Precautions
Remark
4
- 76
4.6 Remote Operation Function
4.6.2 Remote PAUSE
(b) Using development environment (personal computer)
On the <<Online operation>> tab of the C Controller setting utility, perform as
described below.
1) Set "Remote operation" to "PAUSE" and select a target C Controller module or
programmable controller CPU.
2) Click the
Execute
The user program will not stop even if the C Controller module is put in a remote
PAUSE status. (Operation continues in the C Controller module.)
When changing the program processing according to the operation status of the C
Controller module, perform programming utilizing the bus interface function
(QBF_ReadStatusEx function).
The C Controller module operation status can be verified by the following:
• Bus interface function (QBF_ReadStatusEx function)
• C Controller setting utility ("CPU operation status" on <<Module
information>> tab)
button for remote PAUSE.
2) Click
Execute button.