Intelligent Function Module And Interrupt Module Switch Settings - Mitsubishi MELSEC-Q Series User Manual

4
FUNCTIONS
4.13 Intelligent Function Module and Interrupt Module Switch
Settings

(1) Intelligent function module and interrupt module switch settings

(2) Timing when the switch setting is written
4
- 98 4.13 Intelligent Function Module and Interrupt Module Switch Settings
The switch statuses of the Q series intelligent function modules and interrupt modules
can be set on the C Controller setting utility.
The switch setting is written from the C Controller module to each intelligent function
module and/or interrupt module when the C Controller system is powered on or the C
Controller module is reset.
2) Written at power-on or when
C Controller module reset is
completed!
Development environment
(personal computer)
1) Write
Intelligent function module switch setting on <<I/O assignment settings>> tab
Figure 4.76 Writing switch setting to module