Mitsubishi MELSEC-Q Series User Manual page 461

Hide thumbs Also See for MELSEC-Q Series:
Table of Contents

Advertisement

9
UTILITY OPERATION
(5) Equal assignment screen
Table9.113 Explanation of Equal assignment screen (for LB/LW settings (1))
Item
Identical point assignment
button
OK
button
Cancel
Equal assignment
LB equal assignment
Start station
End station
Start No.
Total points assigned
LW equal assignment
The link device points of all stations can be equally assigned on this screen.
The start and end station values show the number of the equal assignment stations
and the setting must be within (Total link stations - (Start station No. - 1)).
(a) When "LB/LW settings (1)" or "LB/LW settings (2)" is set for "Switch
screens" on "Network range assignment" screen
Figure 9.127 Equal assignment screen (for LB/LW settings (1))
Equally assigns the input points to the link devices of each station. (Unit: 16 points)
(Initial value: "(Blank)", Setting range: 16 or more)
Executes equal assignment according to the settings, and closes the "Equal
assignment" screen.
Closes the "Equal assignment" screen without executing equal assignment.
Equally divides the input points and assigns them to the link devices of each station.
Set the method for equal assignment to LB(1) or LB(2).
Set the first of the stations to which equal assignment will be performed.
(Initial value: "(Blank)", Setting range: 1 to ("Total stations"
Set the last of the stations to which equal assignment will be performed.
(Initial value: "(Blank)", Setting range: ("Start station" setting) to ("Total stations"
setting))
Set the start No. of the link device to be equally assigned.
(Initial value: "(Blank)", Setting range:
Set the total points of the link device to be equally assigned.
(Initial value: "(Blank)", Setting range:
Set the method for equal assignment to LW(1) or LW(2).
Set each setting item as in "LB equal assignment".
* 1 "Total stations" is set on the "Network range assignment" screen (
Description
This section (4)(a))
This section (4)(a))
9.5 CC IE Control utility
9.5.5 Operating Parameter settings screen
*1
setting))
*1
This section (4)).
9
- 170
9
10
11
12
13
14
15
16

Advertisement

Table of Contents
loading

This manual is also suitable for:

Melsec q06ccpu-vMelsec q06ccpu-v-bMelsec sw3pvc-ccpu-e

Table of Contents