Mitsubishi MELSEC-Q Series User Manual page 434

9
UTILITY OPERATION
(1) Network information
Item
Module
Network No.
Total no. of stations
I/O master station
Link scan time
Icon
button
Prev
button
Next
9
- 143 9.5 CC IE Control utility
9.5.3 Operating Diagnostics result screen
The link status and station status of the network are displayed.
Table9.97 Explanation of Network information screen
Displays the module on the network, which is being diagnosed.
The number corresponds to one of Slots 1 to 4 on the "Module information" screen.
(Display range: 1 to 4)
Displays the network No. of the network being diagnosed.
(Display range: 1 to 239)
Displays the total number of connected and reserved stations.
(Display range: 1 to 120)
Displays the station No. of the I/O master station on the network being diagnosed.
(Display range: 1 to 120)
Displays the current link scan time. (Unit: ms)
Displays each station status and inter-station status.
( This section (1)(a))
Used to switch the screen when the total number of stations is 61 or more.
Figure 9.109 Network information screen
Description