Mitsubishi MELSEC-Q Series User Manual page 297

9
UTILITY OPERATION
Detailed settings
button
Connect
Exit
Remark
Table9.2 Explanation of Connection settings screen (Continued)
Item
Opens the Detailed settings screen. (
Performs the following processing and closes the "Connection settings"
screen.
• As the connection target, sets the IP address and host name specified
button
in "Connection settings".
• When "Write authority" has been checked, authenticates the account of
the connection target C Controller module.
Closes the "Connection settings" screen without changing the connection
button
target.
* 1 Displays the most recently set connection target data in "Connection target history (newest)".
* 2 Do not set multiple IP addresses under the same host name.
(If such setting has been made, the IP address acquired last is used for communications.)
* 3 The duplicated connection target is not displayed in "Connection target history".
* 4 Each utility shares "Connection target history " (oldest) to (newest).
* 5 "Offline" is not displayed in Connection settings of the Device monitoring utility.
* 6 "Write authority" cannot be set when "Offline" is selected in "Connection settings" or when the
"Connection settings" screen is opened from Device monitoring utility.
* 7 Refer to the following for details.
Section 5.11
1. When each utility is online, the IP address or host name of the connection
target module is displayed on the title bar. (
2. When a utility other than the Device monitoring utility is offline, "Offline" is
displayed on the title bar. (
3. When the C Controller module succeeds in account authentication, the user
name is displayed on the status bar of a utility other than the Device
monitoring utility. (
Description
Section 9.1.7 (1))
Section 9.1.7 (1))
Section 9.1.7 (2))
9.1 Common Utility Operations
9.1.3 Setting connection target
this section (3)(a))
9
- 6
9
10
11
12
13
14
15
16