Mitsubishi MELSEC-Q Series User Manual page 474

9
UTILITY OPERATION
(1) Menu item to be selected
(2) Display screen
1)
1) Device information
2) Network status
3) Data format
9
- 183 9.6 Device Monitoring Utility
9.6.3 Setting 16-point register monitoring
Select [Menu] [16-point register monitoring] from the menu bar.
(Selectable only when batch monitoring is active.)
After choosing [Setting]
monitored. ( Section 9.6.5)
Figure 9.137 16-point register monitoring
Table9.122 Explanation of 16-point register monitoring screen
Item
Displays the current device status.
Changing display format (
Displays the status of the currently set network.
Network setting (
Displays the device type (word device, bit device) and display format.
Changing device type (
Changing display format (
[Device settings] from the menu bar, set the device to be
2)
Description
Section 9.6.4)
Section 9.6.5)
3)
Section 9.6.9)
Section 9.6.9)