Operating Online Operation Screen - Mitsubishi MELSEC-Q Series User Manual

9
UTILITY OPERATION

9.5.4 Operating Online operation screen

The CC-Link IE controller network parameters can be read, written or verified from this
screen.
POINT
(1) Online operation screen
Online operation
Module information
Item
Read parameters
button
Read
Write parameters
button
Write
1. If a communication error has occurred during connection, set Connection
settings again.
2. Communications are not available during reset of the C Controller module.
Start communications after terminating the reset process.
Figure 9.120 Online operation screen
Table9.104 Explanation of Online operation screen
Parameter settings
Reads the CC-Link IE controller network parameters from the C Controller module.
Writes the set CC-Link IE controller network parameters to the C Controller module.
The written parameters become effective when the C Controller module is powered off and
then on or is reset.
This button can be used only when "Write authority" was set at the time of setting
Connection settings ( Section 9.1.3).
This button cannot be used without "Write authority" (
* 1 If parameter writing is needed when "Write authority" is not set, set Connection settings again and
check the "Write authority" box.
Target settings
Description
Section 9.1.3).
9.5 CC IE Control utility
9.5.4 Operating Online operation screen
9
10
11
12
13
14
15
*1
16
(To next page)
9
- 158