Mitsubishi MELSEC-Q Series User Manual page 467

9
UTILITY OPERATION
(1) Access example
Using the logical station No."65", access can be made from a CC-Link IE controller
network module controlled by the C Controller module to CPU No.4 via another CC-
Link IE controller network module (controlled by CPU No.2, network No.1).
From the Device monitoring utility or user program (MELSEC data link function),
access can be made to CPU No.4 by opening Channel No.151 and specifying station
No.65.
The target setting for the above access is shown below.
Control station
QJ71GP21-SX
1 Slot, Channel No.151
(Controlled by
C Controller module)
Figure 9.131 System configuration
* 1 If the CPU No.4 cannot configure the multiple CPU system, access using the logical station No.
cannot be made to the CPU No.4.
Figure 9.132 Target settings screen setting
(Controlled by CPU No.2)
CPU
CPU
*1
No.4
No.2
Network No.1
9.5 CC IE Control utility
9.5.6 Operating Target settings screen
Normal station
QJ71GP21-SX
Station No.: 5
Multiple CPU system
9
- 176
9
10
11
12
13
14
15
16