Function List Of C Controller Setting Utility - Mitsubishi MELSEC-Q Series User Manual

9
UTILITY OPERATION

9.2.1 Function list of C Controller setting utility

This section explains the functions of the C Controller setting utility.
Name
Sets the C Controller module to which this utility will be
Connection settings
connected.
Parameter setting file Saves the parameters set on the C Controller setting
saving/loading utility into a file, and loads them.
Displays the LED and switch statuses, error
Module information information, and drive information of the C Controller
module.
Displays/saves the history of events that occurred in the
Event history
C Controller module.
Monitors the battery-backed-up RAM and changes and
SRAM monitoring
saves the data.
Performs the following processings for the modules
installed in slots.
Module monitoring
Performs the following processings for the C Controller
module.
Online operation
Makes the parameter setting (System settings) of the C
System settings
Controller module.
Makes the parameter setting (I/O assignment settings)
I/O assignment settings
of the C Controller module.
Makes the parameter setting (Multiple CPU settings) of
Multiple CPU settings
the C Controller module.
Diagnoses whether communication with another CPU is
Communication
available or not when the C Controller module is in a
diagnostics
multiple CPU configuration.
Table9.7 Function list of C Controller setting utility
Description
• Monitors the input (X), output (Y), buffer memory and
CPU shared memory statuses.
• Can execute the forced output of the output (Y) and
forced write to the buffer memory and CPU shared
memory.
• Displays an error code of the latest error that has
occurred in an intelligent function module.
• Can display the information of the C Controller
system.
• Performs parameter read/write/verification or remote
operation.
• Sets the IP address/Clock/MD function (Q06CCPU-V
only)/Supplementary settings.
Q06CCPU-
:Applicable, :Applicable but partially restricted,
9.2 C Controller Setting Utility
9.2.1 Function list of C Controller setting utility
Applicability
Reference
Q06CCPU-
section
V V-B
9.1.3
9.1.6
9.2.2
9.2.3
9.2.4
9.2.5
9.2.6
9.2.7
9.2.8
9.2.9
9.2.10
9
9
10
11
12
13
14
15
16
:N/A
- 14