Device Monitoring Utility; Device Monitoring Utility Function List - Mitsubishi MELSEC-Q Series User Manual

9
UTILITY OPERATION

9.6 Device Monitoring Utility

This section explains the operations of the Device monitoring utility.
For the Q06CCPU-V-B, the Device monitoring utility is not available.
The following are the precautions for use of the Device monitoring utility.
(1) While script file processing is being executed (the RUN LED is flashing), access may
Remark

9.6.1 Device monitoring utility function list

The following is the Device monitoring utility function list.
Connection settings
Batch monitoring
16-point register monitoring
Setting monitoring target
Setting device to be
monitored
Word device value change
Continuous word device
value change
ON/OFF of bit device
Changing the format
Start/stop monitoring
Numerical pad
9
- 179 9.6 Device Monitoring Utility
9.6.1 Device monitoring utility function list
not be made from each utility to the C Controller module.
In such a case, connect each utility to the C Controller module after terminating the
script file processing.
For the functions added to the Device monitoring utility by version upgrade, refer
to Appendix 8.
Table9.120 Function list of Device monitoring utility
Name
Sets the connection target of the Device monitoring
utility.
Monitors only one specified device.
Monitors up to five bit devices and one word device at
the same time.
Sets the network for which the Device monitoring utility
is used.
Sets the device to be monitored.
Changes the specified word device data.
Changes the specified word device data for the set
points to the desired data.
Turns ON/OFF the specified bit device.
Changes the format for device monitoring.
Sets start or stop monitoring of device monitoring utility.
Enters a numerical value using a mouse.
Description
Reference
section
9.1.3
9.6.2
9.6.3
9.6.4
9.6.5
9.6.6
9.6.7
9.6.8
9.6.9
9.6.10
9.6.11