Mitsubishi MELSEC-Q Series User Manual page 298

9
UTILITY OPERATION
9
- 7 9.1 Common Utility Operations
9.1.3 Setting connection target
(a) Detailed settings screen
For Ethernet communication between the development environment (personal
computer) and C Controller module, set values for Communication check time
and Retry count.
Item
Communication
check time
Retry count
button
OK
button
Cancel
button
Default
Figure 9.7 Detailed settings screen
Table9.3 Explanation of Detailed settings screen
Set a communication check time for Ethernet communication
between the development environment (personal computer) and C
Controller module. (In units of seconds)
(Initial value: 10, Setting range: 1 to 360)
Set the number of retries in Ethernet communication between the
development environment (personal computer) and C Controller
module.
(Initial value: 0, Setting range: 0 to 9)
Enables the current settings and closes the "Detailed settings"
screen.
Closes the "Detailed settings" screen without enabling the current
settings.
Changes the "Communication check time" and "Retry count"
settings to initial values.
Description