Operating Online Operation Screen - Mitsubishi MELSEC-Q Series User Manual

9
UTILITY OPERATION

9.4.5 Operating Online operation screen

The MELSECNET/H parameters can be read, written or verified from this screen.
Online operation
Item
Read parameters
button
Read
Write parameters
button
Write
9
- 117 9.4 MELSECNET/H Utility
9.4.5 Operating Online operation screen
POINT
1. If a communication error has occurred during connection, set Connection
settings again.
2. Communications are not available during reset of the C Controller module.
Start communications after terminating the reset process.
Table9.79 Explanation of Online operation screen
Parameter settings Target settings
Reads the MELSECNET/H parameters from the C Controller module.
Writes the set MELSECNET/H parameters to the C Controller module.
The written parameters become effective when the C Controller module is powered off
and then on or is reset.
This button can be used only when "Write authority" was set at the time of setting
Connection settings (
This button cannot be used without "Write authority" (
* 1 If parameter writing is needed when "Write authority" is not set, set Connection settings again and
check the "Write authority" box.
Figure 9.91 Online operation screen
Description
Section 9.1.3).
*1
Section 9.1.3).