Mitsubishi MELSEC-Q Series User Manual page 548

10
FUNCTIONS AND PROGRAMMING
1.Connected 2.Connected
network station CPU
QCPU
(Q mode)
MELSECNET/10
QnACPU
QCPU
(A mode), ACPU
10
- 61 10.3 Programming Using MELSEC Data Link Functions
10.3.12 Accessible ranges and devices of MELSEC data link functions
Table10.31 Accessibility table (continued)
3.Relayed network QCPU
1)
CC-Link IE controller
network
MELSECNET/H
MELSECNET/10
MELSECNET(II)
Ethernet
Computer link
CC-Link
CC-Link IE controller
network
MELSECNET/H
MELSECNET/10
MELSECNET(II)
Ethernet
Computer link
CC-Link
CC-Link IE controller
network
MELSECNET/H
MELSECNET/10
MELSECNET(II)
Ethernet
Computer link
CC-Link
* 1 Only when all CPU modules on connected and relay stations are Universal model QCPUs, a CC-
Link IE controller network module of station No.65 or higher can be accessed.
* 2 Access is allowed when the MELSECNET/H module of the connected station is in the
MELSECNET/H mode.
* 3 Access is allowed when the MELSECNET/10(H) module of the connected station is in the
MELSECNET/10 mode.
* 4 The Q06CCPU-V which serial No. (first 5 digits) is "10012" or later can access C Controller
modules.
* 5 Unable to access PC CPU modules.
4.Target CPU
3) 4)
2)
5) 6) 7)
*4*5
*5
*5
*5
*5
: Accessible, : Inaccessible