Mitsubishi MELSEC-Q Series User Manual page 179

4
FUNCTIONS
(3) Intelligent function module and interrupt module switch settings
Make this switch setting in "I/O assignment" on the <<I/O assignment settings>> tab
of the C Controller setting utility.
1) Make I/O assignment settings.
(4) Precautions
(a) Refer to the following manual for details of the switch setting.
(b) This switch setting becomes effective when:
1) Make the I/O assignment settings.
2) Select the
Switch settings
3) Set the module switch data.
2) Select Switch settings.
Figure 4.77 Flow of switch setting
Manual of the intelligent function module or interrupt module used
• The C Controller system is powered on; or
• C Controller module reset is completed.
4.13 Intelligent Function Module and Interrupt Module Switch Settings
button.
3) Set the intelligent function module
and/or interrupt module switch
data.
1
2
3
4
5
6
7
8
4
- 99