Mitsubishi MELSEC-Q Series User Manual page 45

1
OVERVIEW
(15)Supporting Telnet function
The C Controller module has Telnet program preinstalled.
Instead of using Tornado, the Telnet function allows simple remote debugging (task
information display, memory dump, etc.) of the C Controller module to be done by
executing the Shell command from the Telnet tool of the development environment
(personal computer).
(16)Unmounting CompactFlash card (without programs) (Q06CCPU-V only)
The CompactFlash card can be unmounted by the RESET/SELECT switch operation
of the C Controller module.
This enables the CompactFlash card to be removed or the system to be powered off
without a user program created for unmounting the CompactFlash card.
(
(17)Data retention and monitoring by battery-backed-up RAM
The Data stored into the battery-backed-up RAM using a user program
(QBF_ReadSRAM and/or QBF_WriteSRAM function) can be held by the battery even
if the C Controller module is powered off.
Also, the data stored in the battery-backed-up RAM can be monitored with the C
Controller setting utility. (
Development environment
(personal computer)
Figure 1.19 Telnet function
Section 5.8.3)
Section 9.2.4)
Telnet
Remote control
by Telnet!
1.1 Features
C Controller module
1
- 10
1
2
3
4
5
6
7
8