Mitsubishi MELSEC-Q Series User Manual page 444

9
UTILITY OPERATION
Item
*1
Status of all stations
Selected/non-selected
*2
Station No.
Link status
Group
Type
Link start/stop
button
Execute
button
Close
9
- 153 9.5 CC IE Control utility
9.5.3 Operating Diagnostics result screen
Table9.102 Explanation of Link start/stop screen (Continued)
Displays the information of the stations connected to the selected network (own station).
Displayed the status as the link start/stop setting target.
(Display range: "Selected", "Non-selected")
Displays the station No. on the specified network.
(Display range: 1 to 120)
Displays the link status of the station on the specified network.
(Display item: "Linking(blue)", "Suspended(red)")
Displays the group No. of the station on the specified network.
(Display range: 0 to 32)
Displays the type of the station on the specified network.
(Display item: "Control Station", "Normal Station")
Specify the link start or stop.
(Initial value: "Start", Setting range: "Start", "Stop", "Forced start"
Executes the operation selected in the Link start/stop setting for the selected station.
Closes the "Link start/stop" screen.
* 1 When a row in the "Status of all stations" area is right-clicked, a menu box listing "Select group",
"Select all" and "Clear all" is popped up. From this menu, the Selected/non-selected setting can
be changed.
* 2 Reserved stations are not displayed.
* 3 Link start can be executed from a station other than a stop request station.
Description
*3
)