Mitsubishi MELSEC-Q Series User Manual page 317

9
UTILITY OPERATION
(a) Display on SRAM monitoring screen (when "BYTE" is set as "Monitoring
(b) CSV file saved on above screen (a)
(c) Specifications of CSV format
type")
Figure 9.28 SRAM monitoring screen
Battery backup RAM data,192.168.3.3(Default)[CR][LF]
Offset,[+00],[+01],[+02],[+03],
0x00000000,12,34,56,78,
0x00000010,00,00,00,00,
0x00000020,00,00,00,00,
4)
0x0001FFE0,00,00,00,00,
0x0001FFF0,00,00,00,00,
[EOF]
For 1) to 4), refer to 1) to 4) in this section (4)(c).
Figure 9.29 Battery-backed-up RAM data saved in CSV file
The battery-backed-up RAM data are saved in the following CSV format.
1) Columns are separated by commas "," (ASCII code: 2C
2) The line feed code is CR/LF. (ASCII code: CR=0D
3) The IP address of the C Controller module is displayed.
4) Monitored battery-backed-up RAM data are stored in the same arrangement
as "SRAM monitoring".
1)
3) 2)
,[+0D],[+0E],[+0F][CR][LF]
,00,00,00[CR][LF]
,00,00,00[CR][LF]
,00,00,00[CR][LF]
,00,00,00[CR][LF]
,00,00,00[CR][LF]
9.2 C Controller Setting Utility
9.2.4 Operating SRAM monitoring screen
).
H
, LF=0A )
H H
9
- 26
9
10
11
12
13
14
15
16