Mitsubishi MELSEC-Q Series User Manual page 368

9
UTILITY OPERATION
Other station monitoring
Module information
Item
Station information settings
Intelligent buffer select
(word)
Send
Receive
Automatic
button
Clear
9
- 77 9.3 CC-Link Utility
9.3.5 Operating Parameter settings screen
Table9.52 Explanation of Parameter settings screen (Continued)
Online operation
This setting is available only when "Intelligent device station", "Ver. 1 Intelligent device
station", or "Ver.2 Intelligent device station" is selected in "Station type".
Specify the send area. (Word unit)
(Initial value: 64, Setting range: 0, 64 to 4096)
Specify the receive area. (Word unit)
(Initial value: 64, Setting range: 0, 64 to 4096)
Specify the automatic update area. (Word unit)
(Initial value: 128, Setting range: 0, 128 to 4096)
Clears the "Station information settings" parameters and sets the initial values.
(a) Number assigned to target modules
The numbers are assigned to the target modules in ascending order of the "start I/
O No." starting from 1 when this tab is opened or when the parameter setting file
is loaded.
When reassigning numbers to the target modules, the parameter settings are
retained.
1) The position where "start I/O No." is "00" is empty
Target module
Start I/O No.
Figure 9.60 Position where "start I/O No." is "00" is empty
2) A module has been added to the position where "start I/O No." is "00"
Target module
Start I/O No.
Figure 9.61 Module has been added to the position where "start I/O No." is "00"
Parameter settings
Description
1
00 20
2 1
00 20
Target settings Test