Mitsubishi MELSEC-Q Series User Manual page 417

9
UTILITY OPERATION
(a) Initial values of "Device name", "Points", "Start", and "End"
(b) "Device names" on "Link side" and "CPU side"
(c) Setting ranges of link side "Points", "Start", and "End"
Device name
LX
LY
LB
LW
The following indicates the initial values of "Device name", "Points", "Start", and
"End".
Table9.84 Initial values of "Device name", "Points", "Start", and "End"
Setting item Device name
Trans.1
Trans.2
Trans.3 to
Trans.64
The following indicates the setting ranges of the "Device names" on the "Link
side" and the display of the "Device names" on the "CPU side".
Table9.85 "Device names" on "Link side" and "CPU side"
"Link side" setting range
LX
LY
LB
LW
The following indicates the setting ranges of the link side "Points", "Start", and
"End".
(The same setting ranges are applied to all of "Trans.1" to "Trans.64".)
Table9.86 Setting ranges of link side "Points", "Start", and "End"
Points/Start/End
* 1 Only a multiple of 16 can be set to "Points" and "Start" of LX, LY and LB.
* 2 Only a (multiple of 16 -1) can be set to "End" of LX, LY and LB.
Points
LB 8192
LW 8192
"(Blank)"
Points
Start
End
Points
Start
End
Points
Start
End
Points
Start
End
9.4 MELSECNET/H Utility
9.4.6 Operating Parameter settings screen
Start End
0000 1FFF
0000 1FFF
"CPU side" display
LX buffer
LY buffer
LB buffer
LW buffer
Setting range
*1
16 to 8192
*1
0000 to 1FF0
*2
000F to 1FFF
*1
16 to 8192
*1
0000 to 1FF0
*2
000F to 1FFF
*1
16 to 16384
*1
0000 to 3FF0
*2
000F to 3FFF
1 to 16384
0000 to 3FFF
0000 to 3FFF
9
- 126
9
10
11
12
13
14
15
16