Mitsubishi MELSEC-Q Series User Manual page 464

9
UTILITY OPERATION
Constant scan time assurance
Enabled
Disabled
9
- 173 9.5 CC IE Control utility
9.5.5 Operating Parameter settings screen
(a) Link scan operation by Constant scan time assurance setting
Table9.116 Link scan operation by Constant scan time assurance setting
• Link scan time is kept constant.
• Longer link scan time compared with the case of "disabled" setting.
• The larger the "Max. number of transients per station" setting value is, the longer the
link scan time is.
• Link scan time changes when a transient transmission is requested.
• The larger the "Max. number of transients per station" setting value is, the wider the
link scan time changes when a transient transmission is requested.
Link scan operation