Devices To Be Used - Mitsubishi MELSEC-Q Series User Manual

2
SYSTEM CONFIGURATION

2.1.1 Devices to be used

(1) When the main base unit (Q3 B) is used
Commercially available
CompactFlash card (to be
purchased separately)
Remark
2
- 2 2.1 System Configuration
2.1.1 Devices to be used
*1
Battery
Extension cable
Figure 2.1 System configurations when main base unit is used
* 1 The CompactFlash card cannot be installed to the Q06CCPU-V-B.
• Refer to Section 2.1.4 (1) for available base units, extension cables, and power
supply modules.
• Refer to Section 2.2.1 for available I/O modules and intelligent function modules.
C Controller module
Main base unit
Extension base unit
Q series power supply, I/O, Intelligent function modules