Table of Contents
Advertisement
How to set A4, B4, A3, LT, LG or DLT size originals:
Hint
If you set an A4/LT original using the sideways direction(
90 degrees ⇒ see "Transmission with Image Rotation" on page 17.
If you set the original upside down as shown in the diagram, the TTI will appear on
the top of the image at the destination ⇒ see "TTI print" on page 105.
How to set A5 or B5 size originals:
Set originals that cannot be placed in the ADF on the exposure glass one
page at a time.
Lift the platen cover or ADF by
at least 30 degrees. Place the
original face down and align its
upper left corner with the refer-
ence mark at the upper left cor-
ner of the exposure glass.
Hint
If you do not raise the platen cover/ADF by at least 30 degrees the original size
will not be detected.
22
Original
Exposure glass
Original
Exposure glass
ADF
), it is sent rotated by
ADF
Advertisement
Table of Contents
