Table of Contents
Advertisement
This feature helps you to reject junk mail. It lets you specify which terminals
you wish to receive fax messages from; the others will be shut out. This is
useful if you are annoyed with someone.
· 30 Specified Sender (up to 20 characters for each sender with G3 and 24
with G4)
· Wild card (page 213)
IMPORTANT
It is recommended that you print the Sender/Authorized Reception list and
keep it when you register or change a sender. ⇒ See page 164.
Restrictions
You cannot register a Specified Sender who does not have an RTI or CSI.
You can register up to 30 senders for Forwarding, Special RX Nos., and Autho-
rized Reception functions. You sometimes cannot register 30 senders depending
on the number of senders registered with other functions.If you attach the optional
Function Upgrade Card to the machine, you can register up to 50 senders.
Hint
To register a sender, use an RTI or CSI. If you communicate with a sender using
G4, register the G4TID.
To find out a senders RTI/CSI, check the journal (page 123).
Before you use Authorized Reception, switch it on following the steps shown in
"Initial Setup RX" (page 166).
You can specify whether to receive messages from only Specified Senders or to
exclude messages from Specified Senders in "Specifying User Parameters" (page
203). The default setting is "Receive from Authorized Senders."
188
Advertisement
Table of Contents
