Table of Contents
Advertisement
1 Follow steps to shown in "Changing the User Tool Settings" (page 136).
2 Enter the function number for "Key Op. Settings" using the Number keys
and press the Enter(#) key within 3 seconds.
3 Enter the function number for "For-
warding" using the Number keys.
4 Enter the function number for "Reg.
Receiver" using the Number keys.
5 Choose a receiver (Forwarding
Station) to program be entering the
its code number.
Hint
If you make a mistake, press [Cancel]
and enter a correct number.
6 Enter the Forwarding Station's fax
number using the Number keys
and select the communication
type, then press [OK].
Hint
If you make a mistake, press the Clear/Stop key and enter a correct number.
If you have the optional ISDN unit, select the line type to be used before specifying
a fax number. ⇒ See "Communication Type" on page 43.
7 Press [Exit].
8 Press [PrevMenu] 3 times.
9 Press the User Tool key.
178
Advertisement
Table of Contents
