Table of Contents
Advertisement
On Hook
5 Adjust the volume using the
key and press [OK].
Hint
When you press [Cancel], the volume
setting is canceled and the display
shown in 3 appears again.
6 Press [PrevMenu].
7 Press the User Tool key.
An RTI (Receive Terminal Identification) is passed to a receiver or sender when
you send or receive a fax. When the RTI is received, it is shown on the display
and printed in a report at the other end.
The TTI (Transmitter Terminal Identification) is printed on the header of every
fax you send.
You usually should contain your name in both of these identifications.
Restrictions
The RTI does not work unless the other party has the same make machine with
the RTI feature.
You can program up to 20 characters in an RTI and 32 in a TTI.
You can program letter, symbols, number, and spaces in an RTI and TTI.
1 Follow steps to shown in "Changing the User Tool Settings" (page 136).
2 Enter the function number for "Key Op. Settings" using the Number keys
and press the Enter (#) key within 3 seconds.
3 Enter the function number for "RTI/
TTI" using the Number keys.
or
193
Advertisement
Table of Contents
