Table of Contents
Advertisement
6 Carry out the sequence of opera-
tions you wish to store in this pro-
gram, then press the OK key you
selected in step 4.
Hint
If you press the Clear Modes/Energy Saver key, the display returns to the steps
before keystroke programming.
For example, say you wish to use Send Later to destination number 0123456789.
The sequence of operations would be:
• Enter "0123456789" using the Number keys.
• Press [Mode].
• Enter the function number for Send Later using the Number keys.
• Set Send Later. ⇒ See page 78.
If a program is already stored in the Quick Dial key, the function name is shown on
the display. If you want to change the program, press the Clear Modes/Energy
Saver key and program function again.
7 Press [Name].
Hint
You cannot omit a program name. Be
sure to register it.
8 Enter the program name.
Cross-reference
"Entering Text" ⇒ See page 211.
Hint
If a program name is already registered in the Quick Dial key, the name is shown
on the display. If you wish to change the program name, press the Clear/Stop
key and enter another name.
9 Press [OK].
The function and program name are shown on the display.
a Press [OK].
The program is stored.
Hint
If you press [Cancel], the Keystroke
Program is canceled and the display
shown in step 4 appears again.
154
Advertisement
Table of Contents
