Table of Contents
Advertisement
The CSI can contain numerals, a plus sign (+), and spaces. You usually should
register a "country code," "area code (minus the leading zero) followed by your fax
number in that order.
Specify your own analog number (the telephone number to which your machine is
connected) so that the transfer station can return the Transfer Result report to you.
You can program numbers and a pause in your own number. Be sure to enter a
pause after an area code.
1 Follow steps to shown in "Changing the User Tool Settings" (page 136).
2 Enter the function number for "Key Op. Settings" using the Number keys
and press the Enter (#) key within 3 seconds.
3 Enter the function number for "G3
Analog Line" using the Number
keys.
4 Enter the function number for
"PSTN Line Type" using the Num-
ber keys.
5 Select the desired line type and
press [OK].
6 Enter the function number for "CSI" using the Number keys.
7 Enter CSI and press [OK].
In some countries, you can not
use this function.
198
Advertisement
Table of Contents
