Table of Contents
Advertisement
After you press the Start key, the number is dialed straight away. Each page is
transmitted as soon as it has been scanned. The next page is not scanned in
while the current page is being transmitted.
Immediate Transmission is useful if you want immediate confirmation that the
message is being sent to the correct destination (just check the other terminal's
RTI or CSI during transmission).
Hint
The original is not stored in memory. Only one destination can be dialed.
Place the original on the exposure glass or in the ADF. To send two or more pages
from the exposure glass, set them page by page.
You can scan half the pages of your original from the exposure glass and the
remainder from the ADF. When you have finished scanning from the exposure
glass, place the reminder of the pages in the ADF and press Start.
The default transmission mode when the machine is turned on or when modes are
cleared is Memory Transmission. You can change this with the User Parameters
(see page 203).
As default, the machine will return to the default transmission mode (Memory) after
every transmission. You can change this with the User Parameters so the current
mode is maintained.
Check that the Immediate Trans-
mission indicator is lit.
If it is not lit, press the Transmis-
sion mode. key.
Set your original.
Hint
You can set the original any time up until you press the Start key.
Cross-reference
"How to Set an Original" ⇒ See page 21.
Select any scan settings you
require (see page 39).
34
Commu-
Receive
User Tools
nicating
File
Printer
Facsimile
Error
Error
Start
TEL
TX Files
F1
F2
F3
F4
Manual RX
Mode
Status
Standard
Immediate
123
Detail
Trans.
Memory
Super Fine
Stamp
Trans.
Advertisement
Table of Contents
