Table of Contents
Advertisement
When you make a Transfer Request, you must specify the final destinations
(End Receivers) for your message.
You cannot enter the numbers of the End Receivers directly. Instead, enter a
simple code that describes where the numbers are stored in the Transfer Sta-
tion (in Quick Dials, Speed Dials or Groups).
The numbers must first have been stored in Quick Dials, Speed Dials or Groups
in the Transfer Station(s).
Quick Dial
Enter [#] followed by the number (2 digits) of the Quick Dial where the End
Receiver is stored.
e.g. to choose the number stored in Quick Dial 01 in the Transfer Station,
enter: [#] [0] [1]
Speed Dial
Enter [#], [*] followed by th Speed Dial code (2 digits).
e.g. to choose the number stored in Speed Dial 12 in the Transfer Station,
enter: [#] [*] [1] [2]
Group Dial
Enter [#], [*], [*] followed by the Group number (2 digits).
e.g. to choose the number stored in Group 04 in the Transfer Station,
enter: [#] [*] [*] [0] [4]
104
Advertisement
Table of Contents
