Press [OK].
The Transmission Mode menu is
shown. A check mark is added
to Polling Transmission.
Hint
To cancel the Polling Transmission, press [Cancel]. The Transmission Mode menu
is shown.
Press [Exit].
The initial display is shown.
Hint
"Polling TX" is displayed. If you set up other advanced transmission function
(except Polling Reception), "Other" is displayed.
Press the Start key.
This report allows you to verify whether polling transmission has taken place.
Restriction
This report is not printed if the User Parameters (see page 203) are set to allow the
stored originals to be repeatedly sent (Save).
Hint
The User Parameters (see page 203) can be used to switch this report off. The
default setting is on.
By default, a portion of the sent image is printed on the report. You can turn this off
with the User Parameters (see page 203).
The result of a Polling Transmission can also be checked with the Journal.
96