Table of Contents
Advertisement
1 Follow steps to shown in "Changing the User Tool Settings" (page 136).
2 Enter the function number for "Key Op. Settings" using the Number keys and
press the Enter key within 3 seconds.
3 Enter the function number for "Forwarding" using the Number keys.
4 Enter the function number for "Delete Receiver" using the Number keys.
5 Choose the Recever (Forwarding
Station) to delete by entering its
code number.
Hint
If you make a mistake, press [No] and enter a correct number.
6 Press [Yes].
Hint
If you press [No], the Forwarding Sta-
tion is not deleted and the display
shown in 5 appears again.
7 Press [Yes].
The Forwarding Station is deleted.
Hint
When you press [No], the Forwarding
Station is not deleted and the display
shown in 5 appears again.
8 Press [PrevMenu] 3 times.
9 Press the User Tool key.
179
Advertisement
Table of Contents
