Table of Contents
Advertisement
You can turn them on and off for any particular transmission by following the
procedure at the end of this section.
In addition, if you frequently use a certain configuration of options, you can
change the default home position (on or off) of each option with the User Pa-
rameters (see page 203).
TTI (Transmit Terminal Identification) Print
By default, the machine adds this identification on each sending message.
The TTI is the sender's identification. You can program your own TTI to be
printed on messages you send with the Key Operator Settings (see page
169).
Hint
You can switch this feature off with the User Parameters (see page 203).
Label Insertion
With this feature you can have the receiver's name printed on the message
when it is received at the other end. The name will be printed at the top of the
page and will be preceded by "To".
Program the receiver's name and number in a Quick Dial or Speed Dial with
Label Insertion turned on.
Before operation
Program the name and number, see page 138 and 169.
Auto Reduction
By default, if the receiver's paper is smaller than the paper you are sending
on, the message is automaically reduced to fit on the receiver's paper.
Transmitter
(This machine)
Receiver
(Reduction)
105
Advertisement
Table of Contents
