Table of Contents
Advertisement
4 Press the Speed Dial key and speed dial code you wish to delete.
The registered destination is shown on the display.
Hint
If you make a mistake before entering the first digit, press the Clear/Stop key and
enter the correct number. If you make a mistake after entering the last digit, press
[No] and enter the number again.
You can press [Status] to see which
Speed Dials are currently pro-
grammed.
5 Press [Yes].
Hint
If you press [No], the Speed Dial is
not deleted and the display shown in
4 appears again.
6 Press [Yes].
The Speed Dial is deleted.
Hint
If you press [No], the Speed Dial is
not deleted and the display shown in
4 appears again.
7 Press the User Tool key.
If you regularly send messages to a particular destination or transmit using
the same features, you can save a lot of repetitive keypad operations by stor-
ing this information in a Keystroke Program.
Keystroke Programs can then be recalled by just pressing a Quick Dial key.
The following procedure can be used to program a new Keystroke Program or
overwrite an old one.
You can register the following items in Keystroke Programs:
• Memory Transmission, Immediate Transmission, destinations (up to 200
numbers), Resolution, Original Type, G3 or G4 communication mode,
Stamp, Send Later, Confidential Transmission, Personal Code trans-
mission, Auto Document, Book Fax, Irregular Scan Area, Transmission
Deadline, Polling Transmission, Polling Reception, Transfer Request,
and optional functions
• Program name (up to 20 characters)
152
Advertisement
Table of Contents
