Table of Contents
Advertisement
After transmission the machine
will return to standby mode.
Pick up the handset or an externally connected telephone handset and dial. When
the line is connected and you hear a high-pitched tone, press the Start key to
send your fax message. If, on the other hand, you hear a voice at the other end,
continue your converstaion as you would normally over the telephone.
Restriction
The machine can not dial on ISDN lines.
Place the original and select any
scan settings you require (see
page 39).
Pick up the handset.
You will hear a tone from the
external handset.
Dial.
If you make a mistake, replace
the handset and try again from
step 2.
When the line is connected and
you hear a high-pitched tone,
press the Start key.
The machine starts sending the
fax message. If you hear a voice,
pick up the handset before you
press the Start key and notify
the destination that you want to
send a fax message (ask them
to switch to Fax mode).
Replace the handset.
After transmission the machine
will return to standby mode.
38
Advertisement
Table of Contents
