Table of Contents
Advertisement
1 Follow steps to shown in "Changing the User Tool Settings" (page 136).
2 Enter the function number for "Key Op. Settings" using the Number keys
and press the Enter(#) key within 3 seconds.
3 Enter the function number for "Forwarding" using the Number keys.
4 Enter the function number for "Register Sender" using the Number keys.
5 Choose a Specific Sender to reg-
ister by entering its code number.
Hint
If you make a mistake, press the Clear/Stop key and enter a correct number.
6 Press [RTI/CSI].
7 Register an RTI or CSI of a sender
and press [OK].
Cross-reference
"Entering Text" ⇒ See page 211.
8 Select whether or not to register a
sender as a wild card (page 213).
9 Press [Receiver].
180
Advertisement
Table of Contents
