Table of Contents
Advertisement
This is just like using the external handset, except you do not have to pick up
the handset before dialing. Just press the On Hook Dial key and dial the num-
ber. If you hear a voice, you can pick up the handset and speak with the other
party.
Restriction
The machine cannot dial on ISDN lines.
Place the original and select any
scan settings you require.
Cross-reference
"How to Place an Original" ⇒ See page 21.
"Selecting the Scan Settings (Resolution, Density and Original Type)" ⇒ See page 39.
Press the On Hook Dial key.
You will hear a low tone from the
internal speaker. If you wish to
cancel this operation, press the
On Hook Dial key again.
Dial.
The machine immediately dials
the destination. If you make a
mistake, press the On hook dial
or Clear/Modes key and return
to step 2.
When the line is connected and
you hear a high-pitched tone,
press the Start key.
If you hear a voice, pick up the
handset before you press the
Start key and notify the desti-
nation that you want to send a
fax message (ask them to
switch to Fax mode).
37
Advertisement
Table of Contents
