Table of Contents
Advertisement
b Press [OK].
c Press [OK].
The screen shown in step 4 appears again.
d Press the User Tool key.
The Keystroke Program list allows you to print and check functions registered
in keystroke programs. To print this list, follow the steps shown in "Reports/
Lists" (page 164).
E.g. execute a program using Send Later for the fax number
"0123456789."
1 Set your original.
Hint
If the destination, resolution, contrast and/or original type are not registered in the
program, carry out these operations now.
2 Press the Quick Dial key pro-
grammed with the Keystroke Pro-
gram.
In this example, the fax number
and program name "Send Later"
are shown on the display.
3 Press the OK key then the Start key.
The machine starts scanning the original.
The message will be sent at the specified time.
Hint
If you delete a program, the registered program name is also deleted.
Restrictions
When a registered program is being used for a standby Memory Transmission,
the message "This destination is in use for standby transmission file. Please modify/
delete after transmission" is shown and you cannot delete the program.
155
Advertisement
Table of Contents
