Table of Contents
Advertisement
This machine comes with a single Analog (PSTN) line connection for G3
communication as standard. If you install the ISDN Unit option, an extra Digi-
tal (ISDN) line connection for either G3 or G4 communication becomes avail-
able.
F4 key is for communication type selections as default.
Press the F4 key to toggle between G3 and G4.
When the F4 key is lit, G4 is selected.
Restriction
When transmitting, you can only select the line type if dialing with the number
keys or Chain Dial.
Either PSTN or ISDN for G3 communication are selected by the service represen-
tative.
Switching to G3
If the F4 is lit, press it once to switch to G3.
Switching to G4
If the F4 is not lit, press it once to switch to G4.
Printer
Facsimile
Error
Error
TX Files
Start
TEL
F1
F2
F3
Status
Manual RX
Mode
123
F4
Stamp
43
Advertisement
Table of Contents
