Table of Contents
Advertisement
This function deletes all destinations registered in an Optional Group.
Restrictions
If a registered Optional Group is being used for a standby Memory Transmission,
the message "This destination is in use for a standby transmission file. Pease
modify/delete after transmission" is shown and you cannot change destinations
for this Group.
1 Follow steps
2 Enter the function number for "Register/Delete" using the Number keys.
3 Enter the function number for "De-
lete Opt. G. Dial" using the Num-
ber keys.
4 Enter the Optional Group Dial
number (10 to 30) you wish to
delete using the Number keys.
Hint
If you make a mistake with the first digit, press the Clear/Stop key or [Cancel] and
enter the correct number. If you make a mistake with the second digit, press [No]
and enter the number again.
You can press [Status] to see which
Optional Groups are programmed.
5 Press [Yes].
Hint
If you press [No], the Optional Group
is not deleted and the display shown
in step 4 appears again.
The registered destinations are
shown.
148
to
shown in "Accessing the User Tools" (page 136).
Advertisement
Table of Contents
