Table of Contents
Advertisement
Which line is used for G3 transmissions?
• ISDN lines can be used for G3 communication as well as G4 communi-
cations, so this machine is set by default to use the ISDN line for both G3
and G4 transmissions. If you wish to use the Analog (PSTN) line for G3
transmissions, contact your service representative.
• When G3 is used over the ISDN, the subaddress can be used.
Auto Identification (Optional ISDN Unit is Required)
This feature works when G4 is selected. The machine first tries a G4
communication, and if it cannot connect because the receiver is not a G4
terminal, it automatically switches to G3 and redials.
• If the G3 line at the destination is connected to the ISDN via a TA (Termi-
nal adapter) or a PBX, since the called number is on ISDN, the G3 line is
regarded as G4 and the Auto Identification feature may not automatically
switch this machine to G3.
44
Advertisement
Table of Contents
