Table of Contents
Advertisement
a Choose the Forwarding Station you
want to assign this Specific
Sender to enter its code and press
[OK].
b Press [OK].
Hint
If you press [Cancel], the sender is
not registered and the display shown
in 5 appears again.
c Press [Exit].
d Press [PrevMenu] three times.
e Press the User Tool key.
1 Follow steps to shown in "Changing the User Tool Settings" (page 136).
2 Enter the function number for "Key Op. Settings" using the Number keys
and press the Enter key within 3 seconds.
3 Enter the function number for "Forwarding" using the Number keys.
4 Enter the function number for "Delete Sender" using the Number keys.
5 Choose the Specified Sender you
want to delete by entering its code
with number keys.
Hint
If you make a mistake, press the Clear/Stop key and enter a correct number.
If you have a mistake with the second digit, press [No] and enter the number
again.
181
Advertisement
Table of Contents
