Table of Contents
Advertisement
The machine can be set up so that users cannot use it without entering a
registered Personal Code. This prevents an unauthorized person from sending
a fax message and helps track the activity of each user.
1 Follow steps to shown in "Accessing the User Tools" (page 136).
2 Enter the number for "Key Op. Settings" using the Number keys and press
the Enter(#) key within 3 seconds.
3 Enter the number for "Personal
Code" using the Number keys.
4 Enter the number for "Pers. Code
Access "using the Number keys.
5 Switch it on or off using the
key and press [OK].
Hint
If you press [Cancel], the previous
setting is not changed and the dis-
play shown in step 4 appears again.
6 Press [PrevMenu] twice.
7 Press the User Tool key.
172
or
Advertisement
Table of Contents
