Table of Contents
Advertisement
Whenever local custom requires advancing the clock or setting the clock back,
use this feature. You can easily move the clock forwards when daylight saving
time begins, and back when it ends. If you turn this feature on, change the User
Parameter Switch 25 digit 7 (See page 203).
This function allows you to check the total number of transmitted, received,
scanned, and printed pages on the display.
Transmissions :
Receptions : Total number of receiving messages
1 Follow steps to shown in "Changing the User Tool Settings" (page 136).
2 Enter the function number for "Key Op. Settings" using the Number keys
and press the Enter key within 3 seconds.
3 Enter the function number for
"Counters" using the Number keys.
The totals are displayed
4 When you have checked the total
pages, press [OK].
5 Press [PrevMenu].
6 Press the User Tool key.
Using this feature, you can select which tray to print out the message. If you
wish to use this feature, change the User Parameter Switch is digit 0 to 2.
If your machine has a problem, a service technician can perform various diag-
nostic tasks over the telephone line from the service station to try to find out
what is wrong with your machine. The service technician can also use RDS to
change some of your machine's settings if you request it.
Total number of transmitting originals
209
Advertisement
Table of Contents
